Products & Services

plug-free-img.png

What We Do

Supplier of Industrial, Commercial, Institutional Fans and PCD Equipments.

Sales, service, installation of Industrial Fans-Air Curtains, Air Circulators, Axial Flow Fans, Mancoolers, Heavy Duty Exhaust Fans, Centrifugal fans, Roof Extracors, all types of PCD Equipments and polution Control systems. 

Institutional Supply

Supply of all types of fans.

  • Ceiling Fans, Designer Fans
  • Exhaust Fans
  • Pedestal Fans
  • Wall Fans, Table Fans, Cabin Fans, All Purpose Fans

Commercial Supply

Supply of All types of Commercial Fans

  • Air Curtains
  • Air Circulators- Wall Mounting & Pedestal
  • Heavy Duty Exhaust Fans, Ventilating Fans
  • Wall Fans, Table Fans, Cabin Fans, All Purpose Fans

Industrial Supply

Supply of All types of Industrial Fans & PCD Equipments

  • Man Coolers
  • Axial Flow Fans
  • Centrifugal Fans
  • Roof Extractors
air-curtains

AIR CURTAINS

Air Curtains prevents outside air, insects and hot air entry to the conditioned area through the open door ways or the door being opened at frequent intervals. The principle of Air Curtain is that it blows the atmosphere air in a constant velocity at the doorways and forms a air stream for the entire width and height of the door openings. It reduce your energy consumption considerably by holding the uniform cold air temperature at the air conditioned area. In Total it is an energy conservation unit for the air conditioned area. It also eliminated the flies and other small insects infiltration through an open door in order to maintain the required hygienic standard in the specified areas. Air curtains are available in various sizes-2ft, 3ft, 4ft,5ft,6ft,1mtr and 2mtrs.

ALMONARD Aircurtains are Grouped into four models to suit different applications.

AHV-Single Phase : (High Velocity) Can be used in commercial applications.

  • AEHV – Single Phase / Three phase : (Extra high velocity) Can be used in commercial and industrial purpose.
  • A I B – Three Phase : (Insect Barrier) to arrest flies and insects entry in to the protected room.
  • HITECH – Three Phase : For Cold Storage – Pharmaceutical and Confectionary Industries.

SALIENT CONSTRUCTIONAL FEATURES OF “ALMONARD AIRCURTAIN”

  • The casing (shell) of Aircurtain is of Robust construction.
  • The impeller is of Aluminium construction with forward curve blades to minimise the air cutting Noise. The impellers can be made out of SS & with special coating on specific request.
  • Easy mounting arrangement with a flat frame which can be fixed on the wall by suitable coach screws.
  • Adjustable louvers to streamline the air delivery.
  • ALMONARD Aircurtains are coupled with sturdy motors for the continuous duty application.
  • “VIBRATION FREE” Operation.
  • Pre-lubricated both side sealed double ball bearing / Bush bearings to take any load and also for smooth running of Aircurtain.
  • Elegant look and with superior quality powder coated finish.
 AHV – Regular
SL.NoModelDimension
in mm
x H x L
Velocity 
‘M/sec.’
Effective 
Air Flow
in Mtrs.
Motor Rating
WattsRPM
Current input in 
Amps in Mtrs.

WattsRPM
Noise 
Level 
Decibels
Weight
in kg.
1AHV – 2′265x255x61013/142
150 1400
1.5 0.9
6816
2AHV – 3′265x255x91513/142
150 1400
1.5 0.9
6818
3AHV-1 mtr265x255x100013/142
150 1400
1.5 0.9
6819
4AHV-4′265x255x120013/142
150 1400
2.5 1.2
7022
5AHV-5′265x255x152513/142
250 1400
3.4 1.2
7024
6AHV-6′265x255x183013/142
150X2 1400
1.5X2 0.9X2
7233
7AHV-2mtr265x255x200013/142
150X2 1400
1.5X2 0.9X2
7235

 

  AEHV
SL.NoModelDimension
in mm
x H x L
Velocity 
‘M/sec.’
Effective 
Air Flow
in Mtrs.
Motor Rating
WattsRPM
Current input in 
Amps in Mtrs.

WattsRPM
Noise 
Level 
Decibels
Weight
in kg.
1AHV – 2′265x255x61015/162.5
250 1400
3.4 1
7219
2AHV – 3′265x255x91515/162.5
250 1400
3.4 1
7221
3AHV-1 mtr265x255x100015/162.5
250 1400
3.4 1
7222
4AHV-4′265x255x122015/162.5
   
3.8 1.2
7525
5AHV-5′265x255x152515/162.5
370 1400
3.8 1.2
7838
6AHV-6′265x255x183015/162.5
250X2 1400
3.4X2 1.2
7878
7AHV-2mtr265x255x200015/162.5
250X2 1400
3.4X2 1.2
7845

 

  AIB
SL.NoModelDimension
in mm
x H x L
Velocity 
‘M/sec.’
Effective 
Air Flow
in Mtrs.
Motor Rating
WattsRPM
Current input in 
Amps in Mtrs.

WattsRPM
Noise 
Level 
Decibels
Weight
in kg.
1AIB – 3′360x265x91520/223.5
550 1400
  1.7
8033
2AIB-1′360x265x100020/223.5
550 1400
  1.7
8036
3AIB-4 mtr360x265x122020/223.5
1100 1400
  2.1
8240
4AIB-5′360x265x152520/223.5
1100 1400
  2.7
8250
5AIB-6′360x265x183020/223.5
550X2 1400
  1.7×2
8558
6AIB-2′360x265x200020/223.5
550X2 1400
  1.7×2
8560

 

  AHV-SILENT
SL.NoModelDimension
in mm
x H x L
Velocity 
‘M/sec.’
Effective 
Air Flow
in Mtrs.
Motor Rating
WattsRPM
Current input in 
Amps in Mtrs.

WattsRPM
Noise 
Level 
Decibels
Weight
in kg.
1AHV– 2′ Silent265x255x6108/92
150 960
1.5  
6016
2AHV-3′265x255x9158/92
150 960
1.5  
6018
3AHV-1 mtr265x255x10008/92
150 960
1.5  
6019
4AHV-4′265x255x12208/92
180 960
2.5  
6222
5AHV-5′265x255x15258/92
250 960
3.4  
6224
6AHV-6′265x255x18308/92
150X2 960
1.5×2  
6533
7AHV-2′ mtr.265x255x20008/92
150X2 960
1.5×2  
6535

 

  AHV-SMART/DELUX
SL.NoModelDimension
in mm
x H x L
Velocity 
‘M/sec.’
Effective 
Air Flow
in Mtrs.
Motor Rating
WattsRPM
Current input in 
Amps in Mtrs.

WattsRPM
Noise 
Level 
Decibels
Weight
in kg.
1A.Smart–3′ Silent290x190x9159/102
150 1400
1.5  
6221
2A.Smart-1mtr’290x190x10009/102
150 1400
1.5  
6223
3A.Smart-4′290x190x12209/102
180 1400
2.5  
6426
4A.Smart-5′190x290x15259/102
250 1400
3.4  
6430
5A.Smart-6′190x290x18309/102
150X2 1400
1.5×2  
6640
6A.Smart-2 mtr.190x290x20009/102
150X2 1400
1.5×2  
6642
air circulators

AIR CIRCULATORS

Air Circulators are Industrial fans used to keep the air in the room moving around, thus making the entire room more comfortable to be in.  It is not a normal fan that in contrast,  moves air that is directly in contact with it, pulling air from behind it to the front. Air Circulators are widely used in today’s commercial Set-up. Workshop, Factory, Showrooms, Malls, Commercial Spaces, Assembly Shops, Restaurant, Air Ports, Public Places, Railway Platform, Stadium, Depots, Godowns, Temples, Church, Mosque, many more. They are available in both Pedestal type and Wall mounting Type. Air circulators are available in various sizes like 18inch, 24inch and 30inch.

Air Circulator – Pedestal

  • Adjustable Height
  • Strong streamlined pedestal for greater stability
  • Aluminium alloy one piece blade
  • Double ball-bearing 900 oscillation
  • Sturdy close-mesh guard beatifull design
  • Powerful heavy-duty motor
  • Available in Varoius Sizes- 18″, 24″, 30″.
SweepVolts (V)AC Cycles (C/S)Power ConsumptionSpeed RPMPhaseAir Delivery (M3/min)No. Of BladesNo. of Speeds
450 mm (18″)23050100 W1440115033
600 mm (24″)23050180 W1440127031
750 mm (30″)23050250 W1440140031
Wall Mounting Air Circulators:
  • Three spped(18 inch only)
  • Push button, speed control mounted within easy reach of hand
  • vertical adjustable
  • Aluminium alloy one piece blade
  • Double ball-bearing 900 oscillation
  • Sturdy close-mesh guard beatifull design
  • Powerful heavy-duty motor
SweepVolts (V)AC Cycles (C/S)Power ConsumptionSpeed RPMPhaseAir Delivery (M3/min)No. Of BladesNo. of Speeds
450 mm (18″)23050100 W144011503

3

SweepVolts (V)AC Cycles (C/S)Power ConsumptionSpeed RPMPhaseAir Delivery (M3/min)No. Of BladesNo. of Speeds
750 mm (30″)23050250 W1440140031
SweepVolts (V)AC Cycles (C/S)Power ConsumptionSpeed RPMPhaseAir Delivery (M3/min)No. Of BladesNo. of Speeds
600 mm (24″)23050180 W1440127031
heavy duty exhaust fans

HEAVY DUTY EXHAUST FAN

Industrial heavy duty exhaust fans are widely used to removee moisture, odors, humudity and hot airs out of the kitchen,bathrooms, and other are of rooms. Once room airs are pulled out, fresh air can come into the area to fillup the gap there by increasing the freshness of the area. These fans are available in different sizes and RPMs like 12inch, 15inch, 18inch, 24inch, 30 inch and 36inch.

Fan DIA MM/
inhches
Speed RPMInput Power 
Watts
PhaseCurrent AMPSMax free 
Air   DEL.
M3/HR   CFM
Sound level dB
305/12″H/D140050Single0.40
1710 1000
50-55
305/12″H/D90050Single0.21
1145 675
35-40
380/15″H/D1400160Single0.75
3250 1910
60-65
380/15″H/D1400150Three0.45
3250 1910
60-65
380/15″H/D90090Single0.40
2000 1175
50-55
380/15″H/D900100Three0.29
2000 1175
50-55
457/18″H/D1400410Single1.70
6120 3600
65-70
457/18″H/D1400410Three0.65
6120 3600
65-70
457/18″H/D900150Single0.65
3900 2290
55-60
457/18″H/D900150Three0.30
3900 2290
55-60
610/24″H/D700240Single0.40
7100 4175
55-60
610/24″H/D900500Three0.50
7100 4175
55-60
610/24″H/D900500Single2.60
9400 5530
60-65
610/24″H/D900500Three0.85
9400 5530
60-65
750/30″H/D900870Single3.80
12000 7000
70-75
750/30″H/D900910Three1.80
12000 7000
70-75
900/36″H/D7001200Three2.40
28100 16530
75-80
  Air Vent Exhaust Fan
230/9″ H/D140045Single0.25
850 500
25-30
305/12″H/D135075Single0.31
1400 825
40-45
industrial mancooler

PEDESTAL, WALL MOUNTING & TUBULAR MANCOOLERS

Mancoolers are designed for large Air Volume discharge with high velocity and for long distance sweep. Mancoolers can be used in various applications such as Arc furnaces, Drier annealing furnaces, cooling the electrical equipments, for general comfort and proper ventilation in the shop floors. Mancoolers are available in three types.  Wallmounting or Brackets Type Mancoolers, Pedestal and Mancoolers. and Tubular Type Mancoolers.

ALMONARD Mancoolers are available in three types..

(1) Wallmounting or Brackets Type Mancoolers.

(2) Pedestal and Mancoolers.

(3) Tubular Type Mancoolers.

Wall mounting or Brackets Type Mancoolers

The Wallmounting Mancoolers are suitable for mounting at higher elevation in the wall or stanchion to avoid the occupation of floor space. These fans are mounted on steel pipe with suitable holes in the base plates for heavy duty Motors.

Pedestal Type Mancoolers

These type Mancoolers are designed to place on the shop floors. The cast aluminum alloy, statically and dynamically balanced impeller of high efficiency Aerofoil Section blades is mounted directly on the motor shaft with suitable, sturdy protection guards and mounted on the steel pipe with motor base plate. The cast iron solid base holds the assembly on the floor free from Vibration The Air throw can be adjusted vertically for various positions. Castor wheels can be provided for the special application on specific request.

Tubular Type Mancoolers

In this type of Mancoolers, the impeller and Motor Assembly is mounted in the circular casing with suitable stand arrangement. This can be moved from place to place easily even in rough floor areas. The Air flow can be adjusted vertically for any convenient Position. Necessary protection guards are also provided on both sides of the casing.

Technical Specification for Industrial Heavy Duty Type Man Cooler.

Sweep mm/ inchesH.P.RPMTotal air delivery
10 times blade
sweep(M3/Hr.)
Min Peak air velocity at a distance of
10 times blade 
sweep (M.min.)
15 times blade 
sweep (M.min.)
457(18″)0.5137012000
200150
457(18″)2.0281024000
250200
610(24″)0.75140028000
250150
762(30″)2.0140037000
250150
914(36″)2.092056000
250150
914(36″)3.0140065000
275175
1220(48″)5.095074500
250150
industrial mancooler

PEDESTAL, WALL MOUNTING & TUBULAR MANCOOLERS

Mancoolers are designed for large Air Volume discharge with high velocity and for long distance sweep. Mancoolers can be used in various applications such as Arc furnaces, Drier annealing furnaces, cooling the electrical equipments, for general comfort and proper ventilation in the shop floors. Mancoolers are available in three types.  Wallmounting or Brackets Type Mancoolers, Pedestal and Mancoolers. and Tubular Type Mancoolers.

ALMONARD Mancoolers are available in three types..

(1) Wallmounting or Brackets Type Mancoolers.

(2) Pedestal and Mancoolers.

(3) Tubular Type Mancoolers.

Wall mounting or Brackets Type Mancoolers

The Wallmounting Mancoolers are suitable for mounting at higher elevation in the wall or stanchion to avoid the occupation of floor space. These fans are mounted on steel pipe with suitable holes in the base plates for heavy duty Motors.

Pedestal Type Mancoolers

These type Mancoolers are designed to place on the shop floors. The cast aluminum alloy, statically and dynamically balanced impeller of high efficiency Aerofoil Section blades is mounted directly on the motor shaft with suitable, sturdy protection guards and mounted on the steel pipe with motor base plate. The cast iron solid base holds the assembly on the floor free from Vibration The Air throw can be adjusted vertically for various positions. Castor wheels can be provided for the special application on specific request.

Tubular Type Mancoolers

In this type of Mancoolers, the impeller and Motor Assembly is mounted in the circular casing with suitable stand arrangement. This can be moved from place to place easily even in rough floor areas. The Air flow can be adjusted vertically for any convenient Position. Necessary protection guards are also provided on both sides of the casing.

Technical Specification for Industrial Heavy Duty Type Man Cooler.

Sweep mm/ inchesH.P.RPMTotal air delivery
10 times blade
sweep(M3/Hr.)
Min Peak air velocity at a distance of
10 times blade 
sweep (M.min.)
15 times blade 
sweep (M.min.)
457(18″)0.5137012000
200150
457(18″)2.0281024000
250200
610(24″)0.75140028000
250150
762(30″)2.0140037000
250150
914(36″)2.092056000
250150
914(36″)3.0140065000
275175
1220(48″)5.095074500
250150
PCD Equipments

CENTIFUGAL FANS AND ROOF EXTRACORS

Centrifugal Fans are mechanical devices for moving air or other gases in a direction at an angle to the incoming fluid. Centrifugal fans often contain a ducted housing to direct outgoing air in a specific direction or across a heat sink; such a fan is also called a blower fan. They are designed to give high efficiency and low air noise. Roof Extractor is a motor driven fan unit having cast aluminium alloy impellers, aerofoil section blades and is provided with durable weather proofexhaust cowls. The is ideal for extraction of air supply through the roof, usually preferable in factories, power plant, steel plant and foundries.

centrifugal fans
roof extractors

Request A Quote Today

...

Reach Us

Location :

PLOT NO. 169/5645, CHAKEISIANI, NEAR BANK OF INDIA AND AXIS BANK ATM, BHUBANESWAR-751010

Email :

care@ayushmanenterprises.com

Phone :

0674-2586583

9938622420

Ayushman Enterprises serving Industries since more than a decade in the field of sales, service, installation of Industrial Fans-Air Curtains, Air Circulators, Axial Flow Fans, Mancoolers, Heavy Duty Exhaust Fans. We're excited to help you on your journey!